Wi-Fi Enabled Smart Dimmer
Support Voice Control
Comply with Apple HomeKit technology. Remotely control Koogeek Smart Dimmer with your iPhone, iPad, iPod touch or Apple Watch.
Easy Pairing & Easy Installation
Using 2.4GHz Wi-Fi to easily pair with and control the switch. Operate the Koogeek Smart Dimmer without complicated installation
Provide advanced security by end-to-end encryption and authentication between a HomeKit-enabled accessory and your iPhone, iPad, or iPod touch.
Create Scenes to Control Multiple Accessories
Scenes enable you to control multiple accessories at the same time. Turn a scene on or off by tapping it, or just asking Siri.
Adjust the brightness via manual operation or Siri voice commands.
Adopt V-0 grade flame-retardant PC panel.
Over-heat & Over-current Protection
The dimmer will automatically cut off when the internal temperature reaches 85℃ or the current is over 12A.
Monitor Power Consumption
Monitor real-time, daily and monthly electric power consumption via the app.
Remote Control even away from Home
You can set up your Apple TV (4th generation or later with tvOS 10 or later) or iPad (running iOS 10 or later) as a home hub and control Koogeek Smart Dimmer even when you're away from home.
Learn more >
Watch the product film
WARNING! This is an electrical shock hazard. Please call a professional electrician if you are unfamiliar or uncomfortable with electrical work.
Intelligent Control Panel
Adopt industrial-grade IOT chip with low-power consumption from 0.75W to 1 W.
- High-polished PC panel
- Inching switch can withstand up to 50,000 times of press and work up to 10 years.
- Intelligent Control Panel adopts industrial-grade IOT intelligent chip with low-power consumption from 0.75W to 1 W.
- In-wall back panel
Use voice to control your device
Set schedules and timers to automate your home
Easy to control
Control the Smart Light Switch from anywhere with your smartphone
Show energy consumption or electricity cost
- Works with Apple Homekit
- Apple homekit technology provides an easy, secure way to control homekit-enabled accessories
- Siri Compatibility for Voice Control
- Conveniently switch your lights on and off using Siri or with a quick tap on your iPhone.Assign a name to each Smart Switch and communicate each Switch by name when making a voice command.
- Monitor Power Consumption
- Check whether your Koogeek Smart Light Switch is connected properly with a standard light. Monitor its current power and state via the free Koogeek Home app.
- Remote Control
- You can set up your Apple TV (4th generation or later with tvOS 10 or later) or iPad (running iOS 10 or later) as a home hub and control Koogeek Smart Light Switch even when you're away from home.
- Create Scenes to Control Multiple Accessories
- Create individualized scenes and control multiple lights simultaneously with a single Siri voice command or a quick tap on your iPhone.
- Wide Compatibility
- Compatible with all single pole light switches. Not intended for use in 3-way light switches, which are controlled by more than one switch.
- 1. Koogeek Smart Dimmer replaces single pole switches only. Not compatible with 3-way switches, which could be controlled from multiple locations. 2. Neutral wire is required. 3. Metal faceplates are not recommended. Otherwise, it may cause harmful interference to Wi-Fi performance.
- System Requirements
- HomeKit requires an iPhone, iPad, iPod touch or Apple Watch with iOS 8.1 or later
- ETL, FCC, Wi-Fi
- PC, ABS
- Supply voltage
- 100VAC, 60Hz
- Maximum load
- 120VAC, 400W for incandescent lamp; 120VAC, 200W for dimmable LED or dimmable CFL lamp
- Minimum load
- Switch Type
- Single pole
- Switch Style
- Home Wi-Fi
- 2.4Ghz (802.11 b/g/n)
- Length: 117mm
- Width: 70mm
- Thickness: 45mm
- Weight: Approx. 214g
Koogeek Wi-Fi Enabled Smart Dimmer / 3 * Wire Nuts / 2 * Screws / Instruction Manual